Purple Aluminum Chassis for TT Motors - 2WD ADA_Radiation / Geiger **Note:** There are two solder

**Note:** There are two solder jumpers on the back of the 8-stick labeled CO and DO (clock out and data out) that can be cut to interrupt those signals in case you make a closed-loop design where you don't 't want the clock and data from your last LED to interfere with the clock and data to your first

Characteristics at limits of operating range

it is typically under 100 µA for input voltages less than 7 V

and a pack of 10 M/M jumper wires

Purple Aluminum Chassis for TT Motors - 2WD ADA_Radiation / Geiger **Note:** There are two solderThis royal undercarriage is made for the most noble, born in the purple robots! This Aluminum Chassis in Blinka purple makes for an excellent robot body. It's a single piece of bent 2mm thick aluminum, with a variety of holes, slots and cutouts for mounting boards, sensors, and servos. The sides are notched to fit two DC Gear 'TT' motors perfectly you'll want to get four M3 or 4 40 screws in about 24mm 1. 0" to mount the motors. In the front you can