QTR-8A Reflectance Sensor Array Category_Motor & Servo Controllers/Servo Controllers this regulator can deliver up

this regulator can deliver up to 1 A continuous when the input voltage is higher than the output voltage (stepping down)

Data line is 3V only

Jumpers are included on the board for the A4 and A5 pins which are tied directly to the I2C bus and can be used to disconnect the logic level converters from the pins

If you are connecting the LED strip to a breadboard or a typical Arduino with female headers

QTR-8A Reflectance Sensor Array Category_Motor & Servo Controllers/Servo Controllers this regulator can deliver upThis sensor module has 8 IR LED phototransistor pairs mounted on a 0. 375" pitch, making it a great detector for a line following robot. Pairs of LEDs are arranged in series to halve current consumption, and a MOSFET allows the LEDs to be turned off for additional sensing or power savings options. Each sensor provides a separate analog voltage output. Note: The QTR 8A reflectance sensor array requires analog inputs to take readings. The similar QTR